Back views of three bridal looks with a pearl comb, a gold-tone hair vine and flower U pins

Bridal Hair Accessories: How to Choose and Wear Combs, Pins, Vines and Clips

Wedding hair accessories are chosen from photos of the front and worn at the back, which is where most of the mistakes happen. Start from the hairstyle, choose the piece that suits it, then plan where it sits and how it works with a veil. Everything below is from our bridal hair accessories.

Which accessory for which bridal hairstyle

Hairstyle Best accessory Where it sits With a veil
Low chignon Bridal comb or a set of U pins Just above the bun, or scattered across it Veil comb above the bun, accessory below or beside it
Half-up Hair vine or a wide comb Across the join where the top section is gathered Veil under the vine, at the join
Loose waves Side clip or a single comb Above one ear, sweeping hair back Veil at the crown, clip at the side
Updo with veil Small pins or a slim vine Around the veil comb, framing it Veil first, pins after

The four main pieces

How to place a bridal comb

  1. Finish the hairstyle first, including any pinning underneath.
  2. Hold the comb teeth-down, decoration facing out, just above where it will sit.
  3. Slide the teeth into the hair against the direction of the hair, then flip the comb and push it back in the other way so the teeth lock under the hair.
  4. Cross two bobby pins through the comb's side loops or under its edge if it feels loose.

Our bridal combs carry a Hold 1 rating: they are decorative first, so anchor them to a pinned style. More technique in how to use a hair comb.

Back views of three bridal looks: a pearl comb above a low chignon, a gold-tone hair vine across a half-up, and flower U pins around a low bun
Three placements: a comb above a low chignon, a vine across a half-up, and U pins scattered around a bun.

How to place U pins and a vine

  1. U pins: push each pin in with the prongs pointing up, then turn it down and slide it into the bun so the prongs catch both the bun and the hair under it. Space them unevenly; odd numbers look more natural. Steps in how to use hair pins.
  2. Vine: bend it into the curve you want before it goes near your hair. Lay it in place, then pin through the wire loops or wrap the ends around bobby pins every few flowers.
  3. Side clip: sweep a section back above the ear, open the clip and slide it in from behind, pointing toward your face, with a crossed bobby pin under it.
A gold-tone faux pearl cluster bridal comb set above a low chignon
Low chignon: faux pearl cluster comb, Hold 1.
Six faux pearl and crystal flower U pins scattered across a low bridal bun
Scattered pins: pearl and crystal U pins, Hold 1.
A gold-tone lace leaf and rhinestone bridal vine shaped along the side of a low updo
Vine: lace leaf hair vine.

Veil and accessory combinations

  • Veil above, comb below. The most common pairing for a low chignon: the veil comb goes in at the crown, the decorative comb or pins sit at the bun underneath it.
  • Vine around the veil. On an updo, curve a slim vine around the veil comb so it looks like one piece.
  • Clip on the side, veil at the back. For loose waves, a side clip on one side and a simple veil at the crown keep the front clear for photos.
  • Removable veil. If you take the veil off after the ceremony, plan the accessory so the hairstyle still looks finished without it. See our bridal veils.
Back view of a bride with a tulle veil at the crown and a floral bridal comb set just below it above a low bun
Veil first, at the crown; then the comb just below it, above the bun.
A silver-tone crystal leaf bridal clip worn above a low twisted bun
Side clip: crystal leaf bridal clip, Hold 1.
A two-tier white tulle veil worn at the back of a bridal updo
Veil: two-tier tulle veil.

Matching metal tones

  • Ivory, champagne or blush gown: gold-tone pieces and warm pearls usually blend best.
  • Bright white gown: silver-tone and clear crystals look crisper.
  • Jewelry and ring: match the metal you wear closest to your face, usually earrings.
  • Mixing: fine if one tone leads and the other is an accent.

Bridal headbands and crowns

A bridal headband suits loose hair and short cuts that cannot hold a comb. Many hair vines bend into a headband shape, and our bridal crowns and tiaras sit on a band. For bridesmaids or the rehearsal dinner, a pearl headband is an easy match.

Flat lay of a pearl bridal comb, a crystal leaf side clip, four flower U pins and a short tulle veil on ivory satin
A comb, U pins, a side clip and a short veil, all in one metal tone.

Timeline and trial

  1. Two to three months out: choose the hairstyle, then the accessory.
  2. Hair trial: bring the accessory and the veil. Ask your stylist to place them and take photos from the back and both sides.
  3. Week of: pack a small kit: spare bobby pins, two or three extra U pins and a small mirror.

Common mistakes

  • Choosing before the hairstyle. A wide comb has nowhere to go on loose waves.
  • Too many pieces. A comb, a vine and a veil compete. Pick one star.
  • Skipping the anchor. Decorative pieces need a pinned base. Pin the style first.
  • Forgetting the back view. Guests see the back of your head through the whole ceremony.

Quick answers

Where should a bridal hair comb go?

Just above or beside a low bun, or at the join of a half-up. With a veil, the veil comb sits higher at the crown and the bridal comb below it.

How many bridal hair pins do I need?

Three to five for a few accents around a bun, six or more for a scattered look. Odd numbers look more natural.

Can I wear a hair vine without a veil?

Yes. Curved around a low bun, laid across a half-up or bent into a headband, a vine is a finished look on its own. For more updos to build it on, see easy updos for long hair.

Back to blog